#!/bin/rc echo -n cpu > /env/service date > /env/boottime echo -n
plan9 > /env/site
# cs sets /dev/sysname, bind the ether to give cs # an address to
look up ndb/cs # configure the swap channel mount -ct /srv/boot
/n/bootesother other swap /n/bootesother/swap
sysname=`{cat /dev/sysname} prompt=($sysname^'% ' ' ')
switch($sysname){ case kremvax # big multiprocessor
NPROC=4 bind -b '#l' /net; ip/ipconfig #
ip/rarpd & # only if you have suns to boot ip/tftpd -d
& ip/bootp /mail/lib/mailcron & aux/listen il
aux/listen tcp case musca 135.104.9.6 # mips magnum as
cpu server sysname=musca bind -b '#l' /net;
ip/ipconfig # ip/rarpd & # only if you have suns to
boot ip/tftpd -d & ip/bootp aux/listen tcp
aux/listen il } date >> /$cputype/log/$sysname echo -n
'add tcp il udp' > /net/cs
# configure the swap channel and start the pager # it should be
put on a file system that doesn't get backed up to optical disk.
# we do this: # mount -c /srv/boot /n/nobackup other # swap
/n/nobackup/swap # # in the interim, you could try going to unix
(see u9fs(4)): # srv tcp!kremunix!9fs # mount
/srv/tcp!kremunix!9fs /n/kremunix # swap /n/kremunix/tmp echo
swap not enabled, look at /rc/bin/cpurc